Configuration manual
4. FTP, FTPS, TFTP and SFTP
45
www.qtech.ru
the ip tftp source-address or ip tftp source-interface commands to specify the TFTP client
source address or source interface.
Table 4-4 Configuring the functions of a TFTP client
Step
Command
Description
Enter
the
global
configuration mode.
configure terminal
-
Configure
the
source
address of the TFTP client.
ip tftp { source-interface
interface-name | source-
address ip-address }
Optional
By default, the output
port address of the router
to the TFTP server is used
as the source address to
communicate with the
TFTP server.
For the security sake, some networks may restrict the communication
between the address of the outgoing interface of the route from the device
to the TFTP server and the TFTP server, but the other service interface
addresses are available. In this case, users can use the ip tftp source-
address or ip tftp source-interface commands to specify the TFTP client
source address or source interface.
4.2.4
Configure a TFTP Server
Configuration Condition
None
Configure the Functions of a TFTP Server
Before configuring the device as the TFTP server, first enable the TFTP server functions, and
then, the TFTP client can access.
Table 4-5 Configure the functions of a TFTP server
Step
Command
Description
Enter
the
global
configuration mode.
configure terminal
-
