Configuration manual
10. Software Upgrade
104
www.qtech.ru
Ensure that the route between the TFTP/FTP server and the device is reachable and can be
pinged.
TFTP/FTP server is successfully configured and the FPGA program is correctly saved in the
specified TFTP/FTP directory.
Back up the configuration file.
Upgrade the FPGA Program through the TFTP/FTP
Enter the privileged user mode and ensure that the device can obtain the upgrading program
from the external TFTP/FTP server and then upgrade the device by running the sysupdate fpga
command.
Table 10-3 Upgrading the FPGA program through the TFTP/FTP
Step
Command
Description
Enter
the
privileged user
mode.
None
Mandatory
Upgrade
the
FPGA program.
sysupdate [ vrf vrf-name ]
dest-ip-address filename fpga
lpu { all | lpuNo } [ ftp ftp-
username ftp-password ]
Mandatory
By default, the FPGA program
is upgraded through the TFTP
if the FTP is not specified.
Example: The following example shows how to make use of the FTP server 128.255.32.10 to
upgrade the FPGA program package for slot 3 of the service board.
Hostname#sysupdate 128.255.32.10 ir0092sa-fp_fpv006_106.bin fpga lpu 3 ftp a
a
Download
"ir0092sa-fp_fpv006_106.bin"
from
"128.255.32.10"
############################################################################
############
############################################################################
##########
############################################################################
############
##################################################OK
Do you really update "SA" at slot 3 (yes|no)? :y
Erase flash :..............................
Erase flash done!
Update
flash:......................................................................
............
............................................................................
............
........................................................
...............................
............................................................................
............
.........................................
