Configuration manual
3. System Control and Management
34
www.qtech.ru
Configure Absolute Time for Login User Operation
The absolute time for the login user operation refer to the timeout time from the successful
login of a user to the automatic exit of the user, in the unit of minute. If the absolute time is set
to 0, it indicates that the time is not limited. By default, the time is 0. In addition, five seconds
before the configured time expires, the following prompt message is displayed: Line timeout
expired.
Table 3-18 Configuring the absolute time for the login user operation
Step
Command
Description
Enter
the
global
configuration mode.
configure terminal
-
Enter
the
line
configuration mode of
the Console port or
Virtual Type Terminal
(VTY).
line { con 0 | vty vty-min-
number [ vty-max-number ] }
Mandatory
Configure the absolute
time for the login user
operation.
absolute-timeout
absolute-
timeout-number
Mandatory.
By default, the absolute
time is 0, that is, no
time limit.
Configure Privilege Level of Login User
Configure the privilege level of the login user. The default privilege level is 1. A user can
execute only the commands with the level equal to or smaller than the current level.
Table 3-19 Configuring the privilege level of the login user
Step
Command
Description
Enter
the
global
configuration mode.
configure terminal
-
Enter
the
line
configuration mode of
the Console port or VTY.
line { con 0 | vty vty-min-
number [ vty-max-number ] }
Mandatory.
Configure the privilege
level of the login user.
privilege level level-number
Mandatory.
The privilege level is 1.
