Qlogic QConvergeConsole CLI 8100 Series, Руководство пользователя

Страница: 142 / 348

5–Installation in a VMware Environment
Installing the FCoE and Networking Drivers
5-8 FE0254601-00 A
24. Unmount the first ISO file from the ESX host server by issuing the following
command:
# umount /mnt/cdrom
25. Reboot the ESX host server to complete the driver installation and exit
maintenance mode.
Verifying Driver Installation
To verify that the Converged Network Adapter drivers are installed on the VMware
ESX/ESXi 4.0 host server, log in to the service console as root, and then type the
vmkload_mod
command, as shown in Figure 5-9 . The qlge (networking driver)
and qla2xxx (FCoE driver) entries should show
Yes
in the last column.
Figure 5-9. Verifying Adapter Driver Installation
Validating Driver and Firmware Versions
Use the console operating system to identify Converged Network Adapters on a
VMware ESX/ESXi 4.0 system.
To validate the Converged Network Adapter driver and firmware versions:
1. Discover the device using
lspci
.
2. List the subdirectories by issuing the following command:
# ls /proc/scsi:
If the
qla2xxx
directory is present, the QLogic FCoE adapter driver is
installed on the VMware ESX/ESXi 4.0 host server.
3. List the QLogic FCoE adapters present on the ESX host server by issuing
the following command:
# ls /proc/scsi/qla2 xxx
1 2 3 4 5 6
4. Display additional details for a specific FCoE adapter by issuing the
following command:
# cat /proc/scsi/qla2xxx/ <adapter_number>
In this command,
< adapter_number >
is an adapter number.