QBD CDxxHC Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 31

QBD CDxxHC Скачать руководство пользователя страница 19

QBD COOLING SYSTEMS INC.

QBD.COM

19

-

Always use QBD supplied OEM parts only. Use of non-OEM
parts will not only void the warranty but may also lead to a fire,
explosion, serious injury or death.

------------------------------------------------------------------------------------------

-

Only trained and certified technician, for Hydrocarbon
systems, should service these coolers.

------------------------------------------------------------------------------------------

-

Use extreme caution and follow all local/regional codes for
transportation or relocation of Hydrocarbon coolers.

Ref No#47-0040-533

Please call QBD service for additional information if required. Check for refrigerant leak before
connecting or disconnecting power to unit.

16.

LED LIGHTING

-

All HC coolers are installed with customized LED+ lighting for maximum product
illumination, high energy efficiency and convenient replacement option.

-

Check for HC leak prior to disconnecting power. Do not use lights or light

connectors, which are not UL certified for R-290 coolers.

This

may also lead to a

major fire, explosion, severe injury or death.

.

«
...
17
18
19
20
21
...
»

Содержание CDxxHC
































Отзывы:

Нет отзывов