QBD CDxxHC Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 31

QBD CDxxHC Скачать руководство пользователя страница 18

QBD COOLING SYSTEMS INC.

QBD.COM

18

-

Always use QBD supplied OEM parts only. Use of non-OEM
parts will not only void the warranty but may also lead to a fire,
explosion, serious injury or death.

------------------------------------------------------------------------------------------

-

Only trained and certified technician, for Hydrocarbon
systems, should service these coolers.

------------------------------------------------------------------------------------------

-

Use extreme caution and follow all local/regional codes for
transportation or relocation of Hydrocarbon coolers.

control setting should be moved 1 digit

warmer (backwards).

After using the cooler for 24 hours, adjust
the temperature control to the setting that is
best suited for your needs.

NOTE : If the cooler is unplugged or turned
off, you must allow 5 minutes before starting
it or plugging it back in. If you attempt to

restart  it  in  less  than  5  minutes,  it  may  not
restart  and  it  may  damage  the  compressor
and  VOID  WARRANTY.  Turning  the
temperature  control  dial  to  “OFF”  or  “O”
stops cooling but does not shut off power to
the cooler.

USE OF NON-QBD REPLACEMENT PARTS WILL VOID THE WARRANTY. PLEASE
CONTACT QBD (Tel: 905-459-0709) TO CONFIRM MOST CURRENT PART NUMBERS

15.

WIRING DIAGRAM FOR CDxxHC & DCxxHC COOLERS

Ref No#47-0040-532

«
...
16
17
18
19
20
...
»

Содержание CDxxHC
































Отзывы:

Нет отзывов