manualshive.com logo in svg

QBD CDxxHC, Инструкция по установке, эксплуатации и обслуживанию, Страница: 11 / 31

Поделиться
Скачать
QBD CDxxHC Скачать руководство пользователя страница 11

 

 

            

 

 

            QBD COOLING SYSTEMS INC. 

                                                                                                                                                      QBD.COM

   

 

 

 

 

 

11 

 
 
 

 

-

 

Always  use  QBD  supplied  OEM  parts  only.  Use  of  non-OEM 
parts will not only void the warranty but may also lead to a fire, 
explosion, serious injury or death. 

       ------------------------------------------------------------------------------------------ 

-

 

Only  trained  and  certified  technician,  for  Hydrocarbon 
systems, should service these coolers.  

      ------------------------------------------------------------------------------------------ 

-

 

Use  extreme  caution  and  follow  all  local/regional  codes  for 
transportation or relocation of Hydrocarbon coolers.

 

 

9. 

ELECTRICAL SAFETY 

The  cooler  must  always  be  plugged  into  its 
own  dedicated  individual  electrical  circuit, 
which  has  a  voltage  rating  same  as 
mentioned  on  the  serial  plate,  and  is  in 
compliance  with  the  Canadian  Electrical 
Code, Part I, the National Electrical Code or 
the local Electrical Code.  

Ensure  that  a  dedicated  3-prong  grounded 
electrical  receptacle  is  available  at  the 
intended location of the cooler.  

Ensure  that  the  electrical  branch  circuit  of 
the  fixed  wiring  to  the  dedicated  receptacle 
is protected with a fuse or a circuit breaker.  

 

For personal safety, this appliance must  be 
effectively grounded at all times. The power 
cord of this cooler is equipped with a three-
prong  (grounding)  plug  which  mates  with  a 
standard three-prong (grounding) wall outlet 
(receptacle)  to  minimize  the  possibility  of 
electric shock hazard from this cooler.  

Have  the  wall  outlet  and  circuit  checked  by 
a  qualified  electrician  to  make  sure  the 

outlet is effectively grounded.  If only an old 
two-prong  wall  outlet  is  available,  it  is  the 
user’s responsibility and obligation to have it 
replaced with an effectively grounded three-
prong  wall  outlet  for  protection  against 

potential electrical shock and fire hazard. 

DO  NOT  USE  EXTENSION  CORDS, 
POWER  BARS,  AND  /  OR  WIRING 
DEVICE  ADAPTERS  TO  POWER  THE 

COOLER. 

 

Inspect the cooler power supply cord for any 
damage prior to use. Do not use a cord that 
is  damaged  or  have  crack  signs.  If  power 
cord  is  damaged,  it  must  be  replaced  with 
QBD  supplied  OEM  part  only.  Do  not  alter 
impact or apply pressure on power cord. 

Don’t access electrical parts & mechanically 
moving  parts  without  authorization  and  this 
should  be  done  by  a  qualified  service 
technician only. 

 

 

 

 

Содержание CDxxHC
































Отзывы:

Нет отзывов