QBD CDxxHC Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 31

QBD CDxxHC Скачать руководство пользователя страница 12

QBD COOLING SYSTEMS INC.

QBD.COM

12

-

Always use QBD supplied OEM parts only. Use of non-OEM
parts will not only void the warranty but may also lead to a fire,
explosion, serious injury or death.

------------------------------------------------------------------------------------------

-

Only trained and certified technician, for Hydrocarbon
systems, should service these coolers.

------------------------------------------------------------------------------------------

-

Use extreme caution and follow all local/regional codes for
transportation or relocation of Hydrocarbon coolers.

CAUTION

Always  check  for  Hydrocarbon  leak
(using  a  certified  hydrocarbon  leak
detector) before plugging / unplugging/
or switching ON-OFF power supply.

CAUTION

When  working  on  the  equipment  or
parts thereof, the system has to be de-
energized  (by  master  switch,  circuit
breaker  or  separate  cut-out)  and

unplug power cord, such that it cannot
be

restarted

accidentally.

Do

not

reconnect the system to the electric
circuit until all work is completed and all
connections are tested.

CAUTION

All units must be powered at their
nominal operating voltages at all times.
The voltage should be within 10% of the

nameplate voltage rating, as overvoltage
or under voltage could damage the cooler.
QBD is not responsible for the repair or
replacement

of

failed

or

damaged

components  resulting  from  electrical
power  failure,  incorrect  supply  voltage,
low  voltage,  or  unstable  supply  voltage.
Ensure  that  the  power  quality  (i.e.  the

voltage and current harmonics) are
within the acceptable industry tolerance.

CAUTION

Please do not spray or immerse any
electrical component with water and/or
chemicals. Doing so may will void all

warranties

and

may

lead

to

fire,

explosion, severe injury or death.

Always

use

QBD

supplied

OEM

components only which are approved and
certified to be used in coolers using R290.

Consult

QBD technical service (Contact

number (905)-459-0709)

for details on

wiring

diagram,

or

other

electrical

components.

«
...
10
11
12
13
14
...
»

Содержание CDxxHC
































Отзывы:

Нет отзывов