QBD CDxxHC Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 31

QBD CDxxHC Скачать руководство пользователя страница 15

QBD COOLING SYSTEMS INC.

QBD.COM

15

-

Always use QBD supplied OEM parts only. Use of non-OEM
parts will not only void the warranty but may also lead to a fire,
explosion, serious injury or death.

------------------------------------------------------------------------------------------

-

Only trained and certified technician, for Hydrocarbon
systems, should service these coolers.

------------------------------------------------------------------------------------------

-

Use extreme caution and follow all local/regional codes for
transportation or relocation of Hydrocarbon coolers.

12.

CASTER INSTALLATION

The cooler has a new design for caster
installation. It does not require a transfer
plate anymore.

Nut  insert  (to  fit  casters)  is  flush  with  the
bottom surface of base channel. This design
will  allow  caster  top  in  firm  contact  with
cooler  base  channel.  Hence,  transfer  plate
can be avoided.

No Transfer plate required as caster top is
directly in contact with the vase channel
plate. Shim plate may be required for
leveling of cooler.

IMPORTANT NOTE:

-

QBD  does  not  offer  casters  for  PC8**
/PC8L**  models  Do  not  use  any  third
party  casters  kits.  For  safety  and
stability  of  the  cooler,  only  use  the
supplier levelling legs.

-

Don’t adjust the levelling legs beyond a
Maximum Height of 1/2`` (1/2 inch) on
PC8xx coolers.

-

DC6/DC7 models have option for
adjustable leg too.

13.

SHELF INSTALLATION

-

Cooler  shelves  (flat  or  gravity)  and  a
bag  containing  shelf  support  clips  are
packed at the factory inside the unit.

-

In CD HC models (except CD10/12/20
HC), a bottom shelf must be installed on
top of the base step (return air duct).

-

Improper shelf clip installation may

cause  shelf  and/or  product  to  fall  which
could  result  in  personal  injury  or
damage to the cooler.

-

Do NOT place solid packages on bottom
shelf to avoid poor cooling performance.

«
...
13
14
15
16
17
...
»

Содержание CDxxHC
































Отзывы:

Нет отзывов