QBD CDxxHC Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 31

QBD CDxxHC Скачать руководство пользователя страница 16

QBD COOLING SYSTEMS INC.

QBD.COM

16

-

Always use QBD supplied OEM parts only. Use of non-OEM
parts will not only void the warranty but may also lead to a fire,
explosion, serious injury or death.

------------------------------------------------------------------------------------------

-

Only trained and certified technician, for Hydrocarbon
systems, should service these coolers.

------------------------------------------------------------------------------------------

-

Use extreme caution and follow all local/regional codes for
transportation or relocation of Hydrocarbon coolers.

-

Don’t  overload  the  shelves.  The  cooler
is  designed  to  use  all  the  shelves
provided.  Install  in  equally  spaced
configuration.  If  fewer  shelves  or  a
different

configuration

is

required,

contact QBD to ensure that shelf
overloading will not occur.

-

Store products as evenly as possible
inside the cabinet to maintain uniform
product temperature.

14.

COLD CONTROL

Different  cold  controls  are  being  used  in
different models of HC coolers. All these are
certified  for  use  in  an  HC  unit.  Please
contact  QBD  technical  support  to  know
more about cold control for your unit.

All  cooling  deck  based  HC  coolers  are
equipped  with  customized  CAREL  cold
control  (

QBD Part # 47-0520-255

). The

recommended  setting  is  at  #5  which  will
allow  the  cooler  to  operate  between  38-
42°F.  Temperature  probe  should  be  in  the
return air section.
This  controller  features  voltage  protection,
automatic defrost and energy saving logics.

DISPLAY INDICATORS

This  indicates  the  Evaporator  Motor(s)
is/are running but the Compressor is off. On
initial power up, there is an intelligent delay
for  protection  of  the  Compressor.  Power  to
the  Compressor  will  initiate  after  one  (1)
minute.

This  is  the  typical  look  of  the  CAREL
controller  while  in  use.  "USE"  indicates  the
unit is in working order. The symbols to the
left  of  "USE"  indicate  that  the  Compressor
and Evaporator Motor(s) are both running. If
the  Compressor  Indicator  is  blinking,  the
compressor is under "Time Protection".

DEFROST CYCLE

Indication  that  unit  is  in  DEFROST  cycle.
Evaporator  Fan  Motor(s)  is/are  ON  for  4
minutes  and  OFF  for  1  minute  during  this
cycle. To manually initiate the defrost cycle,
push  and  hold  the  "WARMER"  button  for  3
seconds.  The  controller  will  automatically
come out of DEFROST after 20 minutes. To
manually  end  the  defrost  cycle,  push  the
"WARMER" button for 3 seconds.

Second  picture  is  the  indication  that  unit  is
in  DEFROST  MODE  and  Evaporator

«
...
14
15
16
17
18
...
»

Содержание CDxxHC
































Отзывы:

Нет отзывов