Pycom FiPy Скачать руководство пользователя страница 83

Страница: 83 / 496

FTP (Local File System)

There is a small internal file system accessible with each Pycom device, called

/flash

This is stored within the external serial flash memory. If a microSD card is also connected

and mounted, it will be available as well. When the device starts up, it will always boot from

the

boot.py

located in the

/flash

file system.

The file system is accessible via the native FTP server running on each Pycom device.

Open an FTP client and connect to:

url:

ftp://192.168.4.1

username:

micro

password:

python

See

network.server

for information on how to change the defaults. The recommended clients

are:

macOS/Linux: default FTP client

Windows: Filezilla and FireFTP

For example, from a macOS/Linux terminal:

$ ftp 192.168.4.1

The FTP server doesn’t support active mode, only passive mode. Therefore, if using the

native unix FTP client, immediately after logging in, run the following command:

ftp> passive

The FTP server only supports one connection at a time. If using other FTP clients, please

check their documentation for how to limit the maximum allowed connections to one at a

time.

FileZilla

If using FileZilla, it's important to configure the settings correctly.

Do not use the quick connect button. Instead, open the site manager and create a new

configuration. Within the

General

tab, ensure that encryption is set to:

Only use plain FTP

(insecure)

1.3.5 FTP

Содержание FiPy

















































































































































































































































































































































































































































































































Результаты поиска

Содержание FiPy

Отзывы:

Pycom FiPy, Руководство пользователя, Страница: 83 / 496

Результаты поиска

Содержание FiPy

Отзывы: