Pycom FiPy, Руководство пользователя, Страница: 183 / 496

Boot (
boot.py
)
For more WiFi scripts, see the wlan step by step tutorial.
import os
import machine
uart = machine.UART( 0 , 115200 )
os.dupterm(uart)
known_nets = {
'NetworkID' : { 'pwd' : '<password>' , 'wlan_config' : ( '10.0.0.8' , '255.255.0.
0' , '10.0.0.1' , '10.0.0.1' )},
}
from network import WLAN
wl = WLAN()
if machine.reset_cause() != machine.SOFT_RESET:
wl.mode(WLAN.STA)
original_ssid = wl.ssid()
original_auth = wl.auth()
print( "Scanning for known wifi nets" )
available_nets = wl.scan()
nets = frozenset([e.ssid for e in available_nets])
known_nets_names = frozenset([key for key in known_nets])
net_to_use = list(nets & known_nets_names)
try :
net_to_use = net_to_use[ 0 ]
net_properties = known_nets[net_to_use]
pwd = net_properties[ 'pwd' ]
sec = [e.sec for e in available_nets if e.ssid == net_to_use][ 0 ]
if 'wlan_config' in net_properties:
wl.ifconfig(config=net_properties[ 'wlan_config' ])
wl.connect(net_to_use, (sec, pwd), timeout= 10000 )
while not wl.isconnected():
machine.idle() # save power while waiting
print( "Connected to " +net " with IP address:" + wl.ifconfig()[ 0 ])
except Exception as e:
print( "Failed to connect to any known network, going into AP mode" )
wl.init(mode=WLAN.AP, ssid=original_ssid, auth=original_auth, channel= 6 , anten
na=WLAN.INT_ANT)
Domoticz Wrapper (
domoticz.py
)
4.2.13 PIR Sensor
183