Pycom FiPy, Руководство пользователя, Страница: 118 / 496

Changes made to files won’t be automatically uploaded to the board upon restarting or
exiting the
Run
feature, as the Pycom board will not store this code. In order to push
the code permanently to a device, use the
Upload
feature.
Projects
Pymakr Plugin supports user projects, allowing for pre-configured settings such as default
serial address/credentials, files to be ignored and folders to sync.
pymakr.conf
Pymakr Plugin supports local project settings using a file called
pymakr.conf
. This can be
used to store the default serial address of a device, which files to ignore and other settings.
An example
pymakr.conf
is shown below:
{
"address" : "/dev/cu.usbserial-AB001234" ,
"username" : "micro" ,
"password" : "python" ,
"sync_folder" : "scripts"
}
Upload
The Pymakr Plugins have a feature to sync and upload code to a device. This can be used
for both uploading code to a device as well as testing out scripts by running them live on the
device. The following steps demonstrate how to use this feature.
To start using the
Upload
feature, ensure that a project folder has been created for the
device. For example, if using the
pymakr.conf
from above, this project folder should be
named
scripts
. This folder should have the following structure:
Library files should be placed into the
lib
folder, certificates into the
cert
folder and so
on. The
Upload
button will take the highest level folder (currently open) and upload this to
the connected Pycom device. The files will be pushed to the device in exactly the same
2.2 Tools/Features
118