Pycom FiPy, Руководство пользователя, Страница: 100 / 496

Connecting to Objenious LoRaWAN 'Spot'
network
Identifiers
To connect a Pycom LoRa device (LoPy, LoPy4, FiPy) to Objenious you'll need to provision
it. This requires three pieces of information
Device EUI (DevEUI)
Application EUI (AppEUI)
Application Key (AppKey)
Device EUI
This comes from the device itself and can be obtained from
lora.mac()
.
To obtain the required hexadecimal representation you can run the following code on your
LoPy:
from network import LoRa
import ubinascii
lora = LoRa()
print( "DevEUI: %s" % (ubinascii.hexlify(lora.mac()).decode( 'ascii' )))
Application EUI and Application Key
Application EUI and Key are two LoRaWAN parameters that should ideally by generated by
you, if supplying devices to end customers.
The Application EUI is a EUI-64 (8 bytes) identifier which should be universally unique - it's
usually allocated from a MA-S block purchased from the IEEE Registration Authority .
The Application Key should be a randomly generated, secure, 128 bit (16 byte) token.
For testing purposes we provide a script which generates a random Application EUI from our
assignment and a series of Application Keys:
EUI/Key generator for testing
(note: the Application EUI produced by this script is not guaranteed to be unique)
1.4.3.2 Objenious
100