Pycom FiPy, Руководство пользователя, Страница: 145 / 496

#from pytrack import Pytrack
from pysense import Pysense
from LIS2HH12 import LIS2HH12
import time
#py = Pytrack()
py = Pysense()
# display the reset reason code and the sleep remaining in seconds
# possible values of wakeup reason are:
# WAKE_REASON_ACCELEROMETER = 1
# WAKE_REASON_PUSH_BUTTON = 2
# WAKE_REASON_TIMER = 4
# WAKE_REASON_INT_PIN = 8
print( "Wakeup reason: " + str(py.get_wake_reason()))
print( "Approximate sleep remaining: " + str(py.get_sleep_remaining()) + " sec" )
time.sleep( 0.5 )
# enable wakeup source from INT pin
py.setup_int_pin_wake_up( False )
acc = LIS2HH12()
# enable activity and also inactivity interrupts, using the default callback handler
py.setup_int_wake_up( True , True )
# set the acceleration threshold to 2000mG (2G) and the min duration to 200ms
acc.enable_activity_interrupt( 2000 , 200 )
# go to sleep for 5 minutes maximum if no accelerometer interrupt happens
py.setup_sleep( 300 )
py.go_to_sleep()
Methods
pytrack.get_sleep_remaining()
In the event of a sleep session that was awoken by an asynchronous event (Accelerometer,
INT pin or Reset button) the approximate sleep remaining interval (expressed in seconds )
can be found out. The user has to manually use
setup_sleep()
to configure the next sleep
interval.
pytrack.get_wake_reason()
Returns the last wakeup reason. Possible values are:
3.3.3 Sleep
145