PURSUIT 3070 Conter Console, Руководство пользователя

Страница: 93 / 126

C 300
93
CORIAN® SURFACES
Although Corian® is quite resistant to heat, you should always use a hot pad or a trivet with rubber feet to
protect Corian®. Avoid exposing Corian® to strong chemicals, such as paint removers, oven cleaners, etc.
If contact occurs, quickly flush the surface with water. Soapy water or ammonia-based cleaners will remove
most dirt and stains from all types of finishes.
Do not cut directly on Corian® countertops.
Minor damage, including scratches, general or chemical stains, scorches or burns, and minor impact marks
can be repaired on-site with a light abrasive cleanser and a product such as a Scotch-Brite® pad. For heavier
damage, light sanding may be necessary. Heavy damage should be repaired by a Corian® licensed
professional.
11.3 Seats, Upholstery, Canvas and Enclosures
SEAT SLIDES AND SWIVEL BASES
The following maintenance should be performed on the seat slides and swivel bases:
•
Periodically inspect and tighten mounting screws between the seat slides and the seat bottom.
• Periodically inspect and tighten the mounting screws that attach the seat bases to the boat.
• Keep a light film of grease on the manual seat slides.
• Keep a light film of grease on the manual seat adjusting mechanism.
• Periodically clean electric seat slides. Do not use harsh chemicals or abrasives. Lubrication is not required.
VINYL UPHOLSTERY
The vinyl upholstery used on the exterior seats and bolsters, and for the headliner in the cabin, should be
cleaned periodically with soap and water. Any stain, spill or soiling should be cleaned up promptly to prevent
the possibility of permanent staining. When cleaning, always rub gently. Avoid using products containing
ammonia, powered abrasive cleaners, steel wool, strong solvents, acetone and lacquer solvents or other harsh
chemicals as they can cause permanent damage or shorten the life of vinyl. Never use steam heat, heat guns
or hair dryers on vinyl.
Stronger cleaners, detergents and solvents may be effective in stain removal, but can cause either immediate
damage or slow deterioration. Lotions, sun tan oil, waxes and polishes, etc., contain oils and dyes that can
cause stiffening and staining of vinyls.
• Dry soil, dust and dirt - Remove with a soft cloth.
• Dried on dirt - Wash with a soft cloth dampened with water.
• Variations in surface glass - Wipe with a water dampened cloth and allow to air dry.
• Stubborn dirt - Wash with a soft cloth dampened with Ivory Flakes
®
and water. Rinse with clean water.
• Stubborn spots and stains - Spray with either Fantastik Cleaner
®
or Tannery Car Care Cleaner
®
and rub
with a soft cloth. Rinse with clean water.
• Liquid spills - Wipe immediately with a clean absorbent cloth. Rinse with clean water.
• Food grease and oily stains - Spray immediately using either Fantastik Cleaner ® or Tannery Car Care
Cleaner ® , wiping with a soft cloth. Take care not to extend the area of contamination beyond its original
boundary. Rinse with clean water.
CANVAS AND SIDE CURTAINS
Acrylic canvas should be cleaned periodically by using a mild soap and water. Scrub lightly and rinse
thoroughly to remove the soap. Do not use detergents. The top or accessories should never be folded or stored
wet.