background image

C 300

9

Warranty and Warranty Registration Cards
The Pursuit Limited Warranty Statement is included with your boat.  It has been written to be clearly stated
and easily understood.  If you have any questions after reading the warranty, please contact Pursuit Customer
Relations.

Pursuit, engine manufacturers, and the suppliers of major components maintain their own manufacturer's
warranty and service facilities.  It is important that you properly complete the warranty registration cards
included with your boat and engine(s) and mail them back to the manufacturers to register your ownership.
This should be done within 15 days of the date of purchase and before the boat is put into service.  A form
for recording this information is provided at the beginning of this manual.  This information will be important
for you and service personnel to know, if and when you may need service or technical information.

The boat  warranty registration requires the Hull Identification Number  “HIN”  which is located on the
starboard side of the transom, just below the rubrail.  The engine warranty registration requires the engine
serial number(s).  Please refer to the engine owner's manual for the location of the serial number(s).

IMPORTANT:
All boat manufacturers are required by the Federal Boat Safety Act of 1971 to notify first time owners in the
event any defect is discovered “which creates a substantial risk of personal injury to the public.”  It is essential
that we have your warranty registration card complete with your name and mailing address in our files
so that we can comply with the law if it should become necessary.

Product Changes
Pursuit is committed to the continuous improvement of our boats.  As a result, some of the equipment described
in this manual or pictured in the catalog may change or no longer be available.  Pursuit reserves the right
to change standard equipment, optional equipment and specifications without notice or obligation.
  If
you have questions about the equipment on your Pursuit, please contact Pursuit Customer Relations.

Transferring The Warranty
For a Transfer fee, S2 Yachts will extend warranty coverage to subsequent owners of Pursuit models for the
duration of the original warranty period.  Please refer to the Pursuit Limited Warranty Statement for the
procedure to transfer the warranty.

To take advantage of this program, notification of the change of ownership, including the new owner's name,
address and telephone number together with the appropriate fee, must be sent to Pursuit Fishing Boats,
Customer Relations Department, 3901 St. Lucie Boulevard, Ft. Pierce, Florida 34946, within 30 days of the
date of resale.
S2 Yachts will confirm, in writing, that the transfer of the warranty has taken place.  After which, the transferee
will be treated as the original purchaser as outlined in the Pursuit Limited Warranty Statement.

Service
All warranty repairs must be performed by an authorized Pursuit Dealer.  Should a problem develop that is
related to faulty workmanship or materials, as stated in the Limited Warranty, you should contact your Pursuit
dealer to arrange for the necessary repair.  If you are not near your dealer or another authorized Pursuit dealer
or the dealer fails to remedy the cause of the problem, then contact the Pursuit Customer Relations Department
within 15 days.  It is the boat owner's responsibility to deliver the boat to the dealer for warranty service.

IMPORTANT INFORMATION

Содержание 3070 Conter Console































































































































Отзывы: