First steps
Load Pulsar Massive on a track of your choice in your DAW. A good starting point is to load a
basic preset corresponding to the type of track (voice, guitar, bass, drums...). From there:
Start playback and compare how the material sounds with and without Pulsar Massive,
using the bypass button on the interface (the Power switch). You can activate the Auto-
gain mode to compare at equivalent volumes.
Adjust the gains of the different bands according to the desired result (the bands are
sometimes named according to their role)
Adjust the calibration (Drive) to make sure there is no audible saturation while enjoying the
warm and dynamic sound of the Pulsar Massive
You can browse through the many available factory presets to find inspiration quickly, without
getting into technical considerations.
Pulsar Massive - User Manual - page 16 / 35
