The curve display rack
Curve display rack
The top half of Pulsar Massive window is taken up by the curve display rack. This section allows
you to:
View and edit the frequency response of the equalizer channels.
Visualize the spectrum of the output signal on several time scales.
Visualize the input and output levels, as well as the level difference between input and
output.
Equalization using the curve display
Here you can see the frequency response curve of the channel selected at the bottom of this
rack (L or R, M or S), as well as the frequency responses of the individual bands.
Different actions can be performed with the mouse:
In the same way as for all other controls, hold down the
Ctrl
key or use the
right mouse
button
to make fine adjustments.
Hold down the
Shift
key on your keyboard while moving a band to activate the Band Solo
function, which allows you to listen to the effect of that band alone on the input signal.
Use the mouse wheel when hovering your cursor over a band to change its bandwidth.
Parameter window of an EQ band
The band parameters window appears when a band is hovered over with the mouse cursor.
Pulsar Massive - User Manual - page 30 / 35
