Link
This switch links the settings of the two banks of filters. If Link is activated, every setting changed
in the left bank is also carried over to the right bank (and vice versa).
Note: If a parameter is set differently between the two channels, and then the Link switch is
activated, the relative distance between the two channels is maintained. To reset the parameters
of the two channels to the same settings, it is therefore necessary to disable Link beforehand.
Link switch
Listen
These headphone-shaped buttons allow you to solo a single channel and hear only the signal
passing through the left or right filter bank. This parameter is particularly useful in M/S mode to
fine-tune the equalization of each of these channels.
Listen switch
Channel bypass
Bypass processing in either channel (left or right, mid or side) by clicking the relevant light. When
the plugin is placed on a mono channel, these lights will not function.
Channel L (left channel) bypass switch
Band name field
An editable text field above each band lets you name it. The default names are Low, Warmth,
Presence and Air.
Editable band name field
Band bypass
Updating the original unit's Boost/Cut/Out switch, on Pulsar Massive this switch simply activates
or deactivated the band.
Pulsar Massive - User Manual - page 26 / 35
