AVFM 6.1 INSTRUCTION MANUAL
10
--Status------------
Level
0.00 ft
Velocity
0.00ft/s
Flow
0.000 ft/s
Min Flow
0.000USG
Signal Strength
0%
Signal Cutoff
5%
Echo Confidence 100%
STATUS (cont.)
Echo Confidence
Displays the confidence of level measurement
received from the QZ02L submerged sensor, or
PZ15 level sensor, on a 0-100% scale. This value
is a reflection of the percent of echoes received
from pulses. Example: If 8 pulses are sent from
the level sensor and only 4 echoes are received,
Echo Confidence will report 50%. This does not
mean that the level is inaccurate, but instead
means the level reading could be susceptible
to a loss of reading should the conditions
causing missed pulses gets worse. Like an
increase in solids or bubbles in the flow steam.
24 HR LOG
Press
from the MAIN display to view a formatted flow report from
instruments with a built-in data logger. Press
to pan through
Flow
,
Velocity
and
Level
summaries. Press
to scroll down one day or
repeatedly to scroll to a specific date. Up to 365 days can be stored for Flow,
Level, and Velocity. Newest date will overwrite the oldest. Press
to return to
the main display.
Inserting a USB drive into the meter while on this screen will transfer 24 HR
Log data to the USB drive in .csv format.
PASSWORD
The Password (a number from 0000 to 9999) prevents unauthorized access to
the Calibration menu.
From the Main Display press the
key to get to
Password
. Factory
default password is 0000 and if it has not been changed, this screen will be
bypassed completely.
A new password can be stored by going to the
Special Functions
New Password
menu.
If a user password is required, press
to place the cursor under the first digit
and
or
to set the number, then
to the second digit, etc. Press
or
to proceed to the Menu Selections screen.
--24 hr log------Flow
Date
Feb. 12/20
10
50138 USG
Total
34.82 USG/m
Average
52.20 USG/m
Maximum
11:08:00
Max Time
0.000 USG/m
Minimum
9:15:00
Min Time
--Password----------
Password
0000
