Prusa Original Prusa i3 MK2.5, Руководство пользователя

Страница: 9 / 29

To flash firmware on MacOS or Linux, please download the latest version of Slic3r PE for
your system, then download the firmware files and follow the procedure described above.
Downloading and installing USB drivers is not necessary.
The firmware for our lineup of printers is updated regularly. To ensure the best
possible experience when working with the printer and the MMU2, it is necessary to
always use the latest firmware.
5 Loading/Unloading/Selecting filament
It’s essential that you cut the end of the filament as shown in the picture. The
sharp tip ensures proper insertion of the filament into the MMU2 unit.
You don’t need to preheat the nozzle as filament loading only pushes the filament
to the MMU2 unit. Insertion of the filament to the extruder is done automatically
during print.
Pict. 5 - Loading the filament
5.1 Loading all five filaments at once
1. Go to
​
LCD Menu - Load filament - Load All
2. The selector will move to the first position, the first LED will start blinking red
3. Insert the filament to the first PTFE tube and push it until it’s caught by the drive gear
4. The filament will be pushed until it’s detected by the FINDA, then it will be retracted
from the selector, ready to be extruded when needed
5. The LED indicator will turn green, signaling successful filament load, the selector will
move to the 2nd position
6. Repeat the process for the remaining 4 filaments
8