Prusa Original Prusa i3 MK2.5, Руководство пользователя

Страница: 4 / 29

Table of contents
1 About the product 4
2 Quick-start instructions 5
3 Placement and setup 6
4 Flashing the firmware 7
4.1 Flashing firmware on Windows 7
5 Loading/Unloading/Selecting filament 8
5.1 Loading all five filaments at once 8
5.2 Loading one of the filaments using the LCD Menu 9
5.3 Loading one of the filaments using the MMU control buttons 9
5.4 F.I.N.D.A explained 10
6 Calibration 10
6.1 Calibrate the Z-axis 11
6.2 First Layer Calibration 11
7 First Print 13
8 Printing in Multi Material Mode 13
8.1 Importing objects into Slic3r PE - STL, 3MF, AMF 14
8.2 Setting up colors 15
8.3 Slicing a multi-material object 16
8.4 Smart wipe tower 16
8.4.1 Wipe tower placement 16
8.4.2 Purging volumes 17
8.5 Wipe to infill 18
8.6 Wipe object 19
8.7 Supported Materials 20
8.8 Soluble Supports 20
8.8.1 Soluble support interface only 20
8.8.2 Completely soluble supports 20
9 Printing in Single Mode 22
9.1 Colorprint 22
10 Handling 23
10.1 Mounting/Unmounting the MMU2 unit 23
10.2 Transporting the printer 23
12 Troubleshooting 24
12.1 Selector not moving 24
12.2 All five LEDs blinking red after power on 24
12.3 Crash detection 24
12.4 Blinking red LED 25
12.5 Loud clicking and barrel unable to move freely 26
12.6 Replacing the blade in the selector 26
12.7 Setting the PTFE tube length - filament not reaching Bondtech gears 27
3