Prusa Research Original Prusa MINI, Руководство пользователя

Страница: 37 / 116

2. YZ - axis assembly
Original Prusa MINI+ kit assembly 37
STEP 44 Connecting the Y and Z-axis
Move the Y-carriage all the way to the left.
Place the right M3nE nut approximately in the middle of the extrusion length.
Align the Y-axis and Z-axis so that the protruding M3x40 screw points exactly at
the hole in the M3nE nut in the extrusion. Join both parts together. DON'T tighten
the screw fully yet!
STEP 45 Joining the Y and Z-axis together
Take the second M3nE nut from the left and move it all the way to the right, use the
Allen key and gently push it in. There is a notch inside, which will align it properly
for the second screw.
Use the M3x20 screw and again tighten it just slightly, but ensure you have
reached the nut. DON'T tighten the screw fully yet!