Prusa Research Original Prusa MINI, Руководство пользователя, Страница: 26 / 116

2. YZ - axis assembly
26 Original Prusa MINI+ kit assembly
STEP 23 Mounting the Y-motor
Place the Y-axis motor to the holder
on the MINI-Y-plate-rear part.
Make sure the cable from the motor
is oriented in the same way as in
the picture.
Secure the Y-axis motor with three
M3x12 screws.
STEP 24 Mounting the MINI-Y-rear-plate
Once again, make sure that all three M3nE nuts are placed in the extrusion .
Place the MINI-Y-rear-plate on the smooth rods.
Push the MINI-Y-rear-plate all the way onto both extrusions.
Secure both parts with two M5x20r screws. When tightening the M5x20r screws,
push on the extrusion from above.
To prevent damage to the Y-axis motor cable during the assembly, place the cable
into the extrusion.