PRÜFTECHNIK FLUKE VIBGUARD IIoT Скачать руководство пользователя страница 17

Страница: 17 / 30

4.3 Connection via a VPN tunnel

A VPN connection is required if the CMS is connected via a VPN network by means of an Internet router.

There are a number of VPN software providers. Setup may vary depending on the software package used.

Please contact the supplier in this regard. PRUFTECHNIK generally uses the OpenVPN software for dialing

the router packages they supply.

Installing the OpenVPN-Client

Start the installation file (install.exe).

Administrator rights are required to run the file.

If necessary, ignore the certification warnings that are displayed.

With regard to an access certificate supplied separately, which you have requested and received befo-

rehand from the relevant authority, such an access certificate still needs to be inserted. If it is already inclu-

ded in the installation file, this step is not required.

If installation was successful, the openVPN icon appears in the bottom right corner of the system tray.

Establishing a connection to the VPN network

Using the right mouse button, click on the openVPN icon and select “Connect”.

Enter the username and the password.

If necessary, deactivate the Internet proxy.

If the connection is established successfully, a confirmation message appears,

e.g. "mdex fixedip now connected, assigned IP address: x.x.x.x.x".

Example for entering the login details in an OpenVPN client using Windows.

Dialing into the CMS

Start the dial-up connection to the CMS (see the previous section).

Enter the IP address of the CMS in the browser.

Wait for the connection to be established. This can take some time depending on the connection type as the

user interface needs to be loaded.

The VIBGUARD IIoT homepage appears.

VIBGUARD IIoT

Operation

Содержание FLUKE VIBGUARD IIoT































Результаты поиска

Содержание FLUKE VIBGUARD IIoT

Отзывы:

Похожие инструкции для FLUKE VIBGUARD IIoT

Бренды по названию

Популярные бренды

PRÜFTECHNIK FLUKE VIBGUARD IIoT, Операция

Результаты поиска

Содержание FLUKE VIBGUARD IIoT

Отзывы:

Похожие инструкции для FLUKE VIBGUARD IIoT

Бренды по названию

Популярные бренды