PRÜFTECHNIK FLUKE VIBGUARD IIoT, Операция

Страница: 13 / 30

3 Control software
Executable real time software for controlling inputs and outputs, sequence control and visualization is already pre-
installed on the VIBGUARD IIoT. The following software is required for further parameterization, data storage and
analysis. The software is installed on a powerful PC:
Email client
OMNITREND Center
3.1 Hardware and software philosophy
As open systems, the telediagnostic systems offered by PRUFTECHNIK provide a large number of programming and
parameterization possibilities. The following section will provide an overview of the software structure.
As the VIBGUARD IIoT systems are certified together with the OMNITREND Center PC software, they are supplied
with defined program sequence control to ensure the minimum scope of measurements required by the cer-
tification body.
The user is not permitted to change program sequences on the CMS. Three different user levels serve as a means
of protection. The user names and passwords for each level can be found in your password document which is
included in the scope of delivery.
Security level 1: Allows the user to view the overview page, the alarm states, and the display of the readings
on the CMS user interface.
Security level 2: Allows the user to additionally output the log files and to download data as well as query the
system status.
Security level 3: Allows the user to configure the system and to change passwords.
Note!
With
Security level 3
, system configuration files can be changed or deleted. This can result in the CMS no
longer functioning faultlessly. PRUFTECHNIK will support you should work need to be performed on the
system which requires a high security level.
VIBGUARD IIoT 13
Operation