Proware 2126JS6H-SQX, Руководство пользователя

Страница: 216 / 292

NAS System
216 User’s Manual
Cable Model: (APC) simple, smart, ether, usb, or snmp
Please refer to the APC UPS specification for the UPS
cable type used in the particular APC UPS model.
(Beam-Tech) M2501 (default and cannot be changed)
(HyperPro) N/A (no need to specify)
Shut Down delay (Min): Use this option to set the delay time in minutes.
After a power failure, UPS will shutdown the NAS when the Shutdown
Delay time has expired.
NOTE: For most cases, it is recommended to use a value of 1
instead of 0 (zero) in Shutdown Delay.
When set to 0, the timer is disabled and the UPS will shutdown the
NAS depending on the battery level and/or remaining runtime, or
when the UPS battery is exhausted.
However, some types of UPS cables, which do not support low
battery detection, might not work when Shutdown Delay is set to 0.
SNMP IP: the IP address of APC UPS. This is enabled when cable model is set
to “snmp”.
Auto Shutdown UPS (APC only): this will automatically shutdown the NAS
system after power failure; applies only to APC UPS
After completing the settings, press "Save" button.