Protrol IPC4020 Скачать руководство пользователя страница 15

Страница: 15 / 63

IPC402x-UM-2209-1-2.x.x (en)

Ensto Protrol AB

Phone: +46 31 45 82 00

Alfagatan 3

internet: www.protrol.se

431 49 Mölndal, SWEDEN

e-mail: [email protected]

Reset settings:

•

IPC402x is delivered either with Protrol's

factory defaults

or with specific customer settings

(

delivery defaults

) according to agreement between Ensto Protrol and the customer.

•

Reset to

factory

customer

settings

is made on the

System

tab.

Note that passwords for the different login levels are also reset.

Internet settings, the device's IP address, etc., are not reset.

This also applies to IP addresses for IEC 60870-5-104.

•

Complete reset to

factory

customer

settings

A complete reset, including all Internet settings, can be done in two different ways:

From web interface.

Note that there is a great risk of losing the ability to remotely connect to the device after
the reset, depending on the changed IP address and other internet settings!

In order to be able to make a complete reset via the web interface, the user must log in as
the administrator

admin

On the

System

tab you first activate specialist mode, by pressing the button

Display

specialist settings.

After that the button for full reset is displayed,

Reset settings to

delivery / factory defaults.

Содержание IPC4020
































































Результаты поиска

Содержание IPC4020

Отзывы:

Protrol IPC4020, Руководство пользователя, Страница: 15 / 63

Результаты поиска

Содержание IPC4020

Отзывы: