ProteOn XPR36, Руководство пользователя

Страница: 48 / 288

ProteOn XPR36 | Introduction
30
Selecting Buffer Positions with the Instrument Buttons
State or Action Description Diagram
Running state with
Buffer A The system is running a protocol using
Buffer A. The green LED indicates that
the left bottle is the active source in this
case. The Stop button LED is off while
running a protocol
Stop the Protocol
through the ProteOn
Manager software
user interface To stop a protocol, click Stop on the Run
screen and wait for the experiment to
stop. The instrument status changes to
Stop. To resume an experiment, click
Start
Ready state. Press
Stop to go to the
next stage The green LED indicates that the left
bottle is the active source. The Stop
button LED is green, indicating that it is
active. Wait 5 sec before going to the
next stage
Pumps are stopped.
Replace or fill the
desired source
bottle. Press Buffer B
to go to the next
stage The Stop button LED is red, indicating
that the pumps are stopped. Both Buffer
A and Buffer B button LEDs are amber,
indicating that the desired source bottle
can be selected for the replace and
flush process
The system flushes
with the new source.
When the flushing
process is complete,
the system goes to
the next stage The fluidics source changes to the right
bottle, and the flushing process fills the
system with the new fluid. The Buffer B
button LED flashes amber, indicating
that the flushing process is ongoing
Ready state The system is in Ready state again, but
the green LED indicates that the right
bottle is now the active source. The
Stop button LED is green, indicating that
it is active. The system is ready to
execute a protocol