4.3 Zone Input Wiring
The Protégé® EliteSuite® Eclipse LED Keypad is capable of connecting to 8 zone inputs, each zone
input can then be programmed to perform the required function in the system.
The following diagrams show each of the zone wiring configuration settings that are possible.
The programmed zone configuration for the Protégé® EliteSuite® Eclipse LED Keypad is made in the
option settings.
Refer to the General Options section on page 23 for programming of the zone
configuration.
!
When using a tamper input on a device the tamper contacts must be normally
closed and wired in series.
!
All resistors required to wire the zone configurations are provided with the
Protégé® EliteSuite® Eclipse LED Keypad in the accessory bag.
Figure 5 - Zone Input (No Resistors)
Figure 4 - Zone Input (No Resistors)
Zone 1 (1+2)
Zone 1
N.C. Zone Contact
0V
Zone 2
N.C. Zone Contact
Zone 2 (3+4)
PURPLE
ORANGE
BLACK
Zone 3
Zone 3
N.C. Zone Contact
0V
Zone 4
N.C. Zone Contact
Zone 4
YELLOW
GREEN
GREY
7
