5.0 Programmable Output
The Protégé® EliteSuite® Eclipse LED Keypad uses a Programmable Output (PGM) that will activate
during an alarm condition. This Output can be programmed to either:
• Follow the status of the alarm siren time or the Fire alarm setting.
• Follow the armed/disarmed status of the keypad.
Connect a relay or other interface device to this open collector output for activation of
ancillary devices. The behaviour of this Output can also be inverted in the programming.
Refer to
the General Options section on page 23 for details on PGM programming.
!
The PGM Output of the Protégé® EliteSuite® Eclipse LED Keypad is designed for
a maximum current of 100mA. If using it to trigger an external siren then a relay
must be used.
LED
PGM 1
+12V
RED
BROWN
Figure 12 - LED Example
Figure 11 - Programmable Output
BROWN
BLACK
PGM 1
0V
10
