!
All three digits of the Timer value must be entered when programming a timer.
This means that for times below 100, you must enter [0] then the two digits of the
time. For times below 10, you must enter [0], [0] followed by the time digit.
To Program the Timer Value
Step 1
To program the Timer value enter the following key press sequence:
, 1, 2, [TIM 1], [TIM 2], [TIM 3],
Where TIM 1 to 3 are the Timer value digits, entered using the 0 to 9 number keys.
Programming the Exit Delay Timer to 0 will result in no exit delay, the system will immediately arm
the EliteSuite® System.
Example: The sequence , 1, 2, 0, 4, 5, , sets the timer to 45 seconds
11.3 Alarm/Siren Timer (Menu 1, 3)
The Alarm/Siren timer is programmed from 000 to 250 minutes (default 4 minutes).
To View the Timer Value
Step 1
To view the Timer value enter the following key press sequence:
, 1, 3,
The Timer value will be displayed as a sequence of three number LED’s lighting one after the other
corresponding to each of the three digits of the timer.
To Program the Timer Value
Step 1
To program the Timer value enter the following key press sequence:
, 1, 3, [TIM 1], [TIM 2], [TIM 3],
Where TIM 1 to 3 are the timer value digits, entered using the 0 to 9 number keys.
Example: The sequence , 1, 3, 0, 0, 5, , sets the timer to five minutes
22
