INSTALLATION
MANUAL
Remote Keypad
THANK YOU FOR VOTING TEXECOM
Страница 1: ...INSTALLATION MANUAL Remote Keypad THANK YOU FOR VOTING TEXECOM THANK YOU FOR VOTING TEXECOM THANK YOU FOR VOTING TEXECOM THANK YOU FOR VOTING TEXECOM ...
Страница 2: ...ssembly can be unclipped and completely removed if required Mount the keypad using at least two appropriate countersunk screws no larger than No 6 A keyhole slot has been provided to assist mounting and aid levelling 1 2 Selecting an Address Each keypad MUST be given a different address using the DIP switch on the side of the PCB as follows Address DIP 1 DIP 2 DIP 3 DIP 4 1 Off or On Off Off Off 2...
Страница 3: ...ensure that the voltage at the keypad is no less than 10 0V When using 6 core or 8 core cable always use the spare cores to double up on 0V This will allow longer cable runs particularly when connecting keypads in series daisy chain As a rule trebling up on 0V will be more beneficial than doubling up on 12V and 0V Figure 1 Cable Entry Cable entry MUST use either the top left hand hole or the cable...
Страница 4: ...m x 35mm Material 3mm Polycarbonate Packed Weight 380g 1 6 Standards Conforms to European Union EU Electro Magnetic Compatibility EMC Directive 89 336 EEC amended by 92 31 EEC and 93 68 EEC The CE mark indicates that this product complies with the European requirements for safety health environmental and customer protection 1 7 Warranty All Texecom products are designed for reliable trouble free o...