Issue Date: 17/07/2014
Page 24 of 101
Revision: F
Table 1 - Maintenance Check Sheet
Component:
The System
Inspection:
Every Year
/
After a Fall
Yes /No
Visual inspection. Check system for signs of a
fall event.
X
Check system tag is present and legible
X
Check all components for signs of damage,
rusting or severe corrosion
X
Check all components are isolated from disimilar
metals
X
Check integrity of structure
X
Check split pins present and in good condition
X
Check fasteners are correctly tightened. Use
Torque Wrench as required
X
Clean system as necessary
X
Check cable condition for fretting, corrosion,
signs of contamination and damage
X
Check cable tension
X
Inspect brackets for damage, corrosion, or rust.
Look for cracks, bends, or wear that could affect
strength or operation of the system.
X
Check inline energy absorbing elements are intact
X
Check intermediate brackets
X
Check clamps are not overtightened.
X
Cabloc Traveller / Cabloc Pro
Check that the spring is functioning by lifting the
cam arms and letting go, the cam arms should
spring back.
X
Check the rivet and rivet nuts for signs of damage
X
Check the gate of the karabiner opens, closes
and locks
X
Check for cuts, abrasions and fraying
X
Check that there is no visible damage to the
connection between the integral energy absorber
and Cabloc traveller and the integral energy
absorber and karabiner.
X
IMPORTANT:
Extreme working conditions (harsh environment, prolonged use, etc.) may require increasing the frequency of
inspections. DO NOT USE THE SYSTEM IF ANY DOUBTS REMAIN AFTER PRE USE CHECKS HAVE BEEN CONDUCTED
Periodic Examination And Repair History
Date
Reason for entry
(Periodic examination
or repair)
Defects noted repairs
carried out and other
relevant information
Name and signature
of competent person
Periodic examination
next due date
Date Of First Use
Date Of Purchase
Pre Use Check
