manualshive.com logo in svg

ProSoft Technology inRA-x ILX34-AENWG, Руководство по установке

Поделиться
Скачать
ProSoft Technology inRA-x ILX34-AENWG Скачать руководство пользователя страница 73

Glossary of Terms 

ILX34-AENWG 

♦

 POINT I/O Platform 

Setup Guide 

Wireless Point I/O Adapter 

 

 
ProSoft Technology, Inc. 

Page 73 of 79 

July 31, 2009 
 

Subnet Mask 

A mask used to determine what subnet an IP address belongs to. An IP address 
has two components: the network address, and the host (node or device) 
address. For example, consider the IP address 150.215.017.009. Assuming this 
is part of a Class B network (with a subnet mask of 255.255.0.0), the first two 
numbers (150.215) represent the Class B network address, and the second two 
numbers (017.009) identify a particular host on this network. 

Switch 

A network device that cross connects devices or network segments. A switch 
provides each sender/receiver the full network bandwidth (2x in full duplex 
mode), reduces collisions, and increases determinism. 

T 

TCP 

The transport control protocol is a more reliable but slower transport protocol 
than UDP. It is used for explicit (not time critical) messaging in EtherNet/IP. 

TCP/IP 

The transmission control protocol/internet protocol is a transport-layer protocol 
(TCP) and a network-layer protocol (IP) commonly used for communication 
within networks and across internetworks. 

Transaction 

An exchange of request and data and response and data. 

U 

UART 

Universal Asynchronous Receiver/Transmitter 

UDP 

The user datagram protocol (UDP) is a transport protocol that provides a very 
simple but fast capability to send datagrams between two devices. It is used for 
I/O (implicit) messaging in EtherNet/IP. 

W 

WAP 

Wireless Application Protocol. A set of standards to enable wireless devices to 
access internet services, such as the World Wide Web and email. 

WDS 

Wireless Distribution System. Enables access points to communicate with one 
another in order to extend the range of a wireless networks. Used in 802.11g 
based access points. 

Содержание inRA-x ILX34-AENWG
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды