manualshive.com logo in svg

ProSoft Technology inRA-x ILX34-AENWG, Руководство по установке

Поделиться
Скачать
ProSoft Technology inRA-x ILX34-AENWG Скачать руководство пользователя страница 55

Procedures ILX34-AENWG 

♦

 POINT I/O Platform 

Setup Guide 

Wireless Point I/O Adapter 

 

 
ProSoft Technology, Inc. 

Page 55 of 79 

July 31, 2009 
 

3.3 Verify 

Communication 

3.3.1  Wireless Statistics Page 

The 

W

IRELESS 

S

TATISTICS 

page opens when you expand the 

D

IAGNOSTICS 

folder, 

and then click the 

W

IRELESS 

S

TATISTICS 

link on the left side of the page. Use this 

page to view configuration and status information for the Wireless port on the 
ILX34-AENWG. 

 

Link Information 

Field Description 

Signal Strength 

The colored graph indicates the signal level (page 56). 

Signal to Noise 

ƒ

 

< 0 , this is a BAD condition 

ƒ

 

< 10, this is an OK condition 

ƒ

 

> 10, this is a GOOD condition 

Radio Link Time 

The up-link time in days:hours:minutes:seconds.  

Note: This link status is checked at the Refresh rate, once 
every 10 seconds by default.  If the link is down for less time 
than this, the up-time for the link will not get reset to 0. 

Radio Parent MAC 

The MAC address (hexadecimal) of the parent radio (access 
point) 

Data Rate 

Rf rate of the last packet received by the ILX34-AENWG. 
Although this field is informational, some packets, such as 
802.11 management packets, will be at a rate that is lower than 
the data. In such an instance, the data could be going at a rate 
faster than this. 

Содержание inRA-x ILX34-AENWG
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды