PRONAR T683P, Руководство пользователя

Страница: 22 / 138

Pronar T683P CHAPTER 1
1.12
securing material used. Chocks, wooden beams or other elements without sharp edges
should be placed under the trailer wheels, protecting the machine against rolling. Trailer
wheel blocks must be nailed to the load platform planks of the car or secured in another way
preventing their movement. The number of fastening elements (ropes, belts, chains, lashings,
etc.) and the force needed for their tension depends, among others, on the weight of the
trailer, the construction of the car carrying the trailer, the speed of travel and other conditions.
Therefore, it is not possible to specify the fastening plan in detail. A properly attached trailer
will not change its position relative to the transporting vehicle. The fastening means must be
selected according to the manufacturer's instructions. In case of doubt, a larger number of
attachment and securing points for the trailer should be used. If necessary, protect the sharp
edges of the trailer, thus securing the securing means against damage during transport.
FIGURE 1.3. Arrangement of transport handles
(1) carrying handle, (2) upper frame member, (3) bottom frame member
CAUTION
During road transport, the trailer must be mounted on the platform of the vehicle in
accordance with safety requirements and regulations.
While driving, the car driver should exercise extreme caution. This is due to the vehicle's
centre of gravity shifting upwards with the machine loaded.
Use only approved and technically reliable securing measures. Read the operating
instructions of the securing measures manufacturer.