PRONAR T683P, Руководство пользователя

Страница: 35 / 138

CHAPTER 2 Pronar T683P
2.11
•
Any modification of the trailer releases PRONAR Narew from any liability for
damage or injury.
•
Climbing the trailer is possible only when the trailer is absolutely stationary and
the tractor engine is switched off. Tractor and trailer should be secured with
parking brake and wedges should be placed under trailer wheels. Secure the
tractor cab against unauthorized access.
•
Regularly check the technical condition of safety devices and correct tightening of
screw connections (in particular the drawbar and wheels).
•
Inspect the trailer according to the frequency specified in this manual.
•
Before starting work requiring the load box to be raised, it must be emptied of the
load and secured with a support. The trailer must at this time be connected to the
tractor and secured with wedges and blocked with the parking brake.
•
Before starting repair work on hydraulic or pneumatic systems, the residual oil or
air pressure must be completely reduced.
•
Perform maintenance and repair activities applying general principles of health
and safety at work. In the event of a cut, the wound should be immediately
washed and disinfected. In case of serious injuries consult a physician.
•
Repair, maintenance and cleaning work should only be carried out with the tractor
engine switched off and the ignition key removed. Tractor and trailer should be
secured with parking brake and wedges should be placed under trailer wheels.
Secure the tractor cab against unauthorized access.
•
During maintenance or repair work, the trailer may be disconnected from the
tractor, but secured by means of wedges and parking brake. The load box cannot
be raised during this time.
•
If it is necessary to replace individual parts, use only parts recommended by the
manufacturer. Failure to comply with these requirements may endanger the
health or life of bystanders or persons operating the trailer, cause damage to the
machine and constitute the basis for withdrawing the warranty.
•
Before welding or electrical work, the trailer should be disconnected from the
power supply. The paint coating should be cleaned. The fumes of burning paint