PRONAR T683P Скачать руководство пользователя страница 70

Страница: 70 / 138

Pronar T683P

CHAPTER 4

4.8

By controlling the tractor hydraulic manifold levers, set the drawbar

eye at such a height that it is possible to unlock and disconnect the

trailer.

Switch off the tractor engine. Close the tractor cabin and secure it against

unauthorized access.

Disconnect the hydraulic tipping system conduit from the tractor.

Disconnect the electric wire.

Disconnect pneumatic system wires (applies to double conduit systems).

Disconnect the red pneumatic wire.

Disconnect the yellow pneumatic wire.

Disconnect the pneumatic system conduits (applies to single conduit

systems).

Disconnect the pneumatic conduit marked black.

Disconnect the hydraulic brake system hose (applies to trailer version with

hydraulic brake system).

Disconnect the hydraulic tipping system conduits.

Secure the cable ends with covers. Insert the plugs into their respective

sockets.

Place safety wedges under the trailer wheel.

The wheel chocks must be positioned so that one of them is at the

front of the wheel and the other at the rear of the wheel - see chapter

Release tractor hitch, disconnect trailer drawbar from tractor hitch, drive tractor

away.

DANGER

When disconnecting the trailer from the tractor, take particular care. Ensure good
visibility. Unless it is necessary, do not stay between the trailer and the tractor.

Before disconnecting wires and drawbar eye, close tractor cab and secure it against
unauthorized access. The tractor engine must be turned off.

Содержание T683P











































































































































Результаты поиска

Содержание T683P

Отзывы:

Похожие инструкции для T683P

Бренды по названию

Популярные бренды

PRONAR T683P, Руководство пользователя

Результаты поиска

Содержание T683P

Отзывы:

Похожие инструкции для T683P

Бренды по названию

Популярные бренды