PRONAR T683P, Руководство пользователя

Страница: 89 / 138

CHAPTER 4 Pronar T683P
4.27
as standard equipment, the portal walls are on the left side of the
trailer,
in order to open portal walls, unlock the lever (2) - figure (4.5) and the
lever (1) figure (4.4).
open the upper middle (8) and lower (7) locks located in the central
column (3) on the left side of the trailer. Then open the portal walls (1)
and (2) (figure (4.6)) using the handles (6) - figure (4.4). Secure the
walls against accidental closing with locks (5),
Unload the trailer with a forklift, close the walls of the load box,
Before moving off, check the position and correct locking of the walls with the
help of levers and locks. Check the safety of the tipping pins.
4.6.2 UNLOADING OF LOOSE MATERIALS BY HYDRAULIC TIPPING OF THE
LOAD BOX
The trailer is unloaded in the following order:
The tractor and trailer should be positioned to drive straight ahead on flat and
hard ground,
Block the tractor and trailer with parking brake,
the tipping pins (1) and (2) - figure (4.3), (connecting the load box with the
lower frame), place on the side on which the unloading will be performed and
properly lock it;
the pins and individual sockets are designed in such a way that it is
impossible to translate them on the diagonal of the load box, which
would damage the trailer,
handles (3) of correctly locked bolts are directed to the side - figure
(4.4),
lift the hydraulic wall on the left side of the trailers - figure (4.6),
set the control lever for the hydraulic tipping system circuits to position 1 -
tipping the first trailer,
use the manifold lever in the operator's cabin to tilt the load box,