PRONAR T683P, Руководство пользователя

Страница: 28 / 138

Pronar T683P CHAPTER 2
2.4
•
Before coupling the trailer, make sure that both machines are technically sound.
•
Take special care when connecting the machine.
•
When connecting nobody may be between the trailers. The person who helps
aggregate the machine should stand in a place outside the hazardous area and
be visible at all times by the tractor operator.
•
Disconnecting of the second trailer is forbidden if its load box is raised.
•
After completing the coupling of the trailer, check the safety of the hitch.
2.1.4 HYDRAULIC AND PNEUMATIC INSTALLATIONS
•
The hydraulic and pneumatic systems are under high pressure during operation.
•
Regularly check the technical condition of connections and hydraulic and
pneumatic hoses. Oil leaks and air leaks are not permitted.
•
The cut-off valve in the hydraulic tipping system limits the tipping angle of the load
box when tilted to the sides and to the rear. The length of the control cable for this
valve is set by the Manufacturer and it must not be adjusted when the trailer is
used.
•
In the event of a failure of the hydraulic or pneumatic system, the trailer should be
decommissioned until the failure is removed.
•
When connecting the hydraulic conduits to the tractor, make sure that the tractor
hydraulic system and trailer are not under pressure. If necessary, reduce the
residual pressure of the system.
•
In the event of injuries being caused by pressurized hydraulic oil, contact a doctor
immediately. Hydraulic oil can penetrate the skin and cause infection. If the oil
gets into the eyes, rinse with plenty of water and if irritation occurs, contact a
doctor. In the event of contact of oil with skin, wash the area of contact with water
and soap. Do not use organic solvents (petrol, kerosene).
•
Use hydraulic oil recommended by the manufacturer.
•
After changing the hydraulic oil, the used oil must be disposed. Used oil or oil
which has lost its properties should be stored in original containers or