PRONAR T679/5 Скачать руководство пользователя страница 97

Страница: 97 / 116

SECTION 5

PRONAR T679/5

5.25

5.5 HYDRAULIC SYSTEM MAINTENANCE

5.5.1 PRELIMINARY INFORMATION

Work connected with the repair, replacement or regeneration of hydraulic system

components should be entrusted to specialist establishments which have the appropriate

technology and qualifications for this type of work.

TIP

Bleeding of the hydraulic system is not required during normal operation of the
trailer.

The duties of the operator connected with the maintenance of hydraulic systems include:

•

checking tightness and visual inspection of the system,

•

checking technical condition of hydraulic connections.

5.5.2 CHECKING HYDRAULIC SYSTEM TIGHTNESS

Required maintenance activities

Hitch the trailer to tractor.

Connect the tipping system conduit according to the recommendations in the

Operator's Manual.

Clean connections and hydraulic cylinders (tipping cylinder, tailgate cylinder

and hydraulic brake system cylinders).

Start the tractor's engine and raise and lower the load box several times.

Check operation of cut-off valve. Leave the cylinder in the maximally extended

position.

Connect the tailgate system conduits.

Open and close the tailgate several times.

Connect the hydraulic braking system conduit.

Depress the tractor brake pedal.

Содержание T679/5





















































































































Результаты поиска

Содержание T679/5

Отзывы:

PRONAR T679/5, Руководство оператора, Страница: 97 / 116

Результаты поиска

Содержание T679/5

Отзывы: