PRONAR T679/5 Скачать руководство пользователя страница 85

Страница: 85 / 116

SECTION 5

PRONAR T679/5

5.13

ATTENTION

Incorrectly adjusted brake may cause rubbing of brake shoes against brake
drums, which may lead to faster wear of brake linings and/or brake overheating.

TABLE 5.1

Operating data of pneumatic cylinder

NOMINAL CYLINDER STROKE

L [mm]

MINIMUM CYLINDER

STROKE

MIN

[mm]

MAXIMUM CYLINDER

STROKE

MAX

[mm]

INSPECTION

•

Check technical condition of brake every 6 months.

•

After repair of braking system.

•

In case of uneven trailer wheels braking.

Required maintenance activities for pneumatic brakes

Hitch the trailer to tractor.

Turn off tractor engine and remove key from ignition.

Immobilise tractor with parking brake.

Make sure that the manure spreader's brakes are not engaged.

Secure the trailer with wheel chocks.

Make a line (A) on the brake cylinder rod (1) to indicate the position of the

maximum withdrawal of the brake cylinder rod – figure (5.8).

Press the tractor brake pedal and mark the position of the maximum extension

of the brake cylinder piston rod with a line (B).

Measure the distance between lines (A) and (B). If the brake cylinder piston

stroke is outside the proper operating range, adjust the expander arm.

Dismantle brake cylinder fork pin.

Содержание T679/5





















































































































Результаты поиска

Содержание T679/5

Отзывы:

PRONAR T679/5, Руководство оператора, Страница: 85 / 116

Результаты поиска

Содержание T679/5

Отзывы: