PRONAR T679/5 Скачать руководство пользователя страница 69

Страница: 69 / 116

SECTION 4

PRONAR T679/5

4.17

close the hydraulic tailgate (1) by actuating a suitable hydraulic circuit from the

tractor - figure (4.2),

before moving off make sure that the hydraulic tailgate or hinged hatch is

properly locked.

FIGURE 4.3

Unloading load box with hinged-opening tailgate

(1) hinged-opening tailgate, (2) load box, (3) telescopic cylinder, (4) chain, (5) chain catch, left, (6)

catch pin, (7) cotter pin, (8) pin

In case of the trailer with hinged-opening tailgate, construction materials and construction

equipment can be loaded and unloaded by opening the hatch (1) to the right side of the

trailer. To do this, remove pin (8) together with securing cotter pin and open the hatch. It is

permissible to unload the load box with open hatch to the side provided that the hatch is

secured with pin (8) in the load box holder. The load box with the hatch open to the side may

be loaded and unloaded only if the load box is completely lowered. Do NOT pull pin (8) out

when the load box is raised. After closing the hinged-opening tailgate, confirm that the

tailgate is secured with pin (8). Do NOT drive with unsecured hinged-opening tailgate.

Содержание T679/5





















































































































Результаты поиска

Содержание T679/5

Отзывы:

PRONAR T679/5, Руководство оператора, Страница: 69 / 116

Результаты поиска

Содержание T679/5

Отзывы: