PRONAR T679/5 Скачать руководство пользователя страница 79

Страница: 79 / 116

SECTION 5

PRONAR T679/5

5.7

5.2.4 MOUNTING AND DISMOUNTING WHEEL, INSPECTION OF

WHEEL NUT TIGHTENING

Dismounting wheel

Place chocks under the wheel that will

not be dismounted.

Ensure that trailer shall not move during

wheel dismounting.

Loosen wheel nuts according to the

sequence shown in figure (5.4).

Place lifting jack and lift trailer.

The lifting jack should have sufficient

lifting

capacity

and

should

technically reliable.

The lifting jack must be positioned on a level and hard surface so as to prevent

sinking into the ground or relocating the jack during lifting.

If necessary, use proper backing plates in order to prevent the lifting jack from

sinking into the ground.

Make certain that the lifting jack is positioned properly.

Dismount wheel.

Wheel mounting

Clean axle pins and nuts of contamination.

Do not grease thread of nuts and pins.

Check condition of pins and nuts, if necessary replace.

Place wheel on hub, tighten nuts so that wheel rim adjoins hub exactly.

Lower the trailer, tighten nuts according to recommended torque and given sequence.

FIGURE 5.4

Sequence of undoing and

tightening nuts

Содержание T679/5





















































































































Результаты поиска

Содержание T679/5

Отзывы:

PRONAR T679/5, Руководство оператора, Страница: 79 / 116

Результаты поиска

Содержание T679/5

Отзывы: