PRONAR T679/5 Скачать руководство пользователя страница 81

Страница: 81 / 116

SECTION 5

PRONAR T679/5

5.9

5.2.5 CHECKING AIR PRESSURE IN TYRES, EVALUATING

TECHNICAL CONDITION OF TYRES AND STEEL WHEELS

TIP

Tyre pressure values are specified in information decal, placed on wheel or on
the frame above machine wheel.

Tyre pressure should be checked each time after changing spare wheel and not less than

every month. In the event of intensive use, air pressure in tyres should be checked more

frequently. During this time trailer must be unloaded. Checking should be done before

travelling when tyres are not heated, or after an extended period of parking.

DANGER

Damaged tyres or wheels may be the cause of a serious accident.

While checking pressure pay attention to technical condition of wheels and tyres. Look

carefully at tyre sides and check the condition of tread. In case of mechanical damage

consult the nearest tyre service and check whether the tyre defect requires tyre replacement.

Wheels should be inspected with regard to distortion, breaking of material, breaking of welds,

corrosion, especially in the area of welds and contact with tyre.

INSPECTION

•

Every month of use.

•

Every week during intensive work.

Содержание T679/5





















































































































Результаты поиска

Содержание T679/5

Отзывы:

PRONAR T679/5, Руководство оператора, Страница: 81 / 116

Результаты поиска

Содержание T679/5

Отзывы: