PRONAR T679/5 Скачать руководство пользователя страница 93

Страница: 93 / 116

SECTION 5

PRONAR T679/5

5.21

5.3.3 INSPECTION OF THE SYSTEM

INSPECTION

•

Each time during tightness inspection.

During tightness inspection attention should additionally be given to technical condition and

degree of cleanness of the system components. Contact of pneumatic conduit seals etc. with

oil, grease, petrol etc. may cause damage and accelerate the ageing process. Bent,

permanently deformed, cut or worn conduits should be replaced.

5.4 CLEANING THE AIR FILTERS

Depending on trailer working conditions, but not less than once in three months, take out and

clean air filter elements, which are located in pneumatic system connection conduits. Inserts

are used many times and are not subject to changing unless they are mechanically

damaged.

FIGURE 5.12 Air filter

(1) securing slide lock, (2) air filter cover

Required maintenance activities

Reduce pressure in supply conduit.

Содержание T679/5





















































































































Результаты поиска

Содержание T679/5

Отзывы:

PRONAR T679/5, Руководство оператора, Страница: 93 / 116

Результаты поиска

Содержание T679/5

Отзывы: