PRONAR T669XL, Руководство оператора, Страница: 80 / 135

Pronar T669XL, Pronar T700XL SECTION 4
4.18
DANGER
Overloading the trailer, erroneous loading and securing of the load is the most
frequent cause of accidents during transport.
If there is a danger of load packaging moving, do NOT transport this type of
material. A moving load constitutes a serious hazard during travel for the tractor
driver and other road users.
The load must be arranged in such a way that it does not threaten the stability
of the trailer and does not hinder driving.
The arrangement of the load may not cause an overload on the axle or hitch
system of the trailer.
Materials which may cause corrosion of steel, chemical damage or react in any other way
negatively affecting the trailer structure may be transported only on condition of appropriate
load preparation. Materials must be tightly packed (in plastic foil sacks, plastic containers
etc.). During transport, packaging contents may not come into contact with load box.
Therefore, ensure the appropriate tightness of containers.
It is impossible to describe all methods of loading due to the diversity of materials, tools,
means of fixing and securing a load. The trailer user must carefully read the regulations
concerning road transport and comply with them.
4.4 TRANSPORTING LOADS
When driving the tractor with the trailer on public roads, comply with the road traffic
regulations. Listed below are the key guidelines for driving the tractor and trailer combination.
•
Before moving off make sure that there are no bystanders, especially children,
near the trailer or the tractor. Take care that the driver has sufficient visibility.
•
Make sure that the trailer is correctly attached to the tractor and tractor's hitch is
properly secured.
•
Vertical load borne by the trailer drawbar eye affects the steering of the
agricultural tractor.
•
The trailer must not be overloaded, loads must be uniformly distributed so that the
maximum permissible axle loads are not exceeded. The trailer's maximum