PRONAR T669XL Скачать руководство пользователя страница 116

Страница: 116 / 135

Pronar T669XL, Pronar T700XL

SECTION 5

5.30

5.4.4 REPLACEMENT OF HYDRAULIC CONDUITS

Rubber hydraulic conduits must be replaced every 4 years regardless of their technical

condition. This should be entrusted to specialised workshops.

Replacement of hydraulic conduits:

•

every 4 years.

5.5

MAINTENANCE OF ELECTRICAL SYSTEM AND WARNING

ELEMENTS

5.5.1 PRELIMINARY INFORMATION

Work connected with the repair, change or regeneration of electrical system components

should be entrusted to specialist establishments, having the appropriate technology and

qualifications for this type of work.

The responsibilities of the user are limited to:

•

technical inspection of electrical system and reflectors,

•

changing bulbs (if lamps are equipped with bulbs).

ATTENTION

Do NOT travel with out of order lighting system. Damaged lamp lenses, and
burned-out bulbs must be replaced immediately before travelling. Lost or
damaged reflective lights must be replaced.

Required maintenance activities

Connect trailer to tractor with appropriate connection lead.

Check if the connection lead is reliable. Check connection sockets in

tractor and trailer.

Check completeness and technical condition of trailer lights.

Check completeness of all reflectors.

Check correct mounting of the slow-moving vehicle warning sign holder.

Содержание T669XL








































































































































Результаты поиска

Содержание T669XL

Отзывы:

PRONAR T669XL, Руководство оператора, Страница: 116 / 135

Результаты поиска

Содержание T669XL

Отзывы: